PIXE study on recovery of making-technology of Chinese Longquan celadon made in the Southern Song Dynasty (1127–1279 CE)

Proton induced X-ray emission (PIXE) technique and factor analysis were used to study the recovery of making-technology of Chinese Longquan celadon made in the late Southern Song Dynasty (1127–1279 CE). Based on factor analysis, for the raw material for body and the recipe for glaze, there is a close but slightly different relationship between these Longquan celadons unearthed from the core area of Dayao and the non-core area, despite all the Longquan celadons belong to the high-calcium-glaze system. The chemical compositions of most of the tentative body and glaze samples are very close to those of Longquan celadons unearthed from the core area of Dayao and the non-core area. This study can provide a guidance for recovery of making-technology of Longquan celandon.     

非径向管板焊接接头的超声检测

对AP1000压水堆核电站安全壳贯穿件的非径向管板焊接接头结构特点进行了介绍,并分析其超声检测工艺的重点和难点。通过建立统一的缺陷定位坐标系并结合被检构件的几何特点进行综合分析,推导得出了h值(缺陷回波最高点距套管外壁的距离)的计算方法。为超声检测对这类焊接接头缺陷的准确识别和定位提供了行之有效的方法,为解决这类焊接接头的超声检测技术受限区提供了行之有效的措施。     

Experimental and computational study on the separation performance of an electrostatic precipitator with curved transvers collecting plates

Aiming at the problems of low collection efficiency of fine particulate matter and large area occupied by existing electrostatic precipitators (ESP), a new type of horizontal electrode ESP is proposed. It has the advantages of accelerating turbulent coalescence, increasing the effective dust collecting area and increasing the particle driving speed. The performance of the new type of ESP is systematic studied through simulation and experiment at the same time, and the results matches well. By comparing the dust removal effect of the horizontal electrode ESP and the conventional ESP, it can be concluded that the horizontal electrode ESP has a better dust removal efficiency, and can still maintain a better dust removal effect under high air velocity. The dust removal efficiency of new ESP can reach above 98% under the experimental conditions.     

广西玉林胜果寺古代冶铸遗址研究

玉林胜果寺古代冶铸遗址位于广西玉林市兴业县龙安镇杨前村胜果寺附近的丘陵,面积超过2 000m~2。采用扫描电镜及能谱分析(SEM-EDS)、金相和矿相等研究方法,对胜果寺古代冶铸遗址的5个冶金遗物炉渣样品进行成分和显微组织分析检测。结果表明,该遗址为生铁冶铸遗址,炼渣属锰硅铝系高锰炉渣。冶炼产品除供本地铸锅等生产生活用品外,大量运往韶州涔水场浸铜。     

适用于无线体域网的动态口令认证协议

无线体域网中传输的是与生命高度相关的敏感数据，身份认证是信息安全保护的第一道防线。现有的基于人体生物信息的身份认证方案存在信息难提取、偶然性大和误差性大的问题，基于传统密码学的认证方案需较大计算资源和能量消耗，并不适用于无线体域网环境。为此，在动态口令和非对称加密机制基础上，提出一种适用于无线体域网的动态口令双向认证轻量协议，并对其进行形式化分析。通过理论证明、SVO逻辑推理及SPIN模型检测得出：该协议满足双向认证，且能够抵御重放攻击、伪装攻击、拒绝服务器攻击和口令离线攻击，具有较高安全性。     

Slag eye formation in single and dual bottom purged industrial steelmaking ladles

ABSTRACT

Argon gas is often injected from the bottom of the ladle during steel refining operations. The injected gas interacts with the liquid (metal and slag) bath and enhances the momentum, heat, and mass transfer rate in the melt. However, during these gas–liquid interactions, an opening of the slag layer called slag eye is formed, which exposes the molten metal surface to the atmosphere, which is generally undesirable. In the current work, a transient, three-dimensional mathematical model is used to study the turbulent gas–liquid interactions in single as well as dual bottom blown industrial steelmaking ladles. A Coupled Level Set Volume of Fluid (CLSVOF) model is used for tracking the steel-argon, steel-slag, and argon-slag interfaces, from which the slag-eye area has been predicted. It is found that the inlet gas purging rate, melt height, slag layer thickness, angular and radial positions of the gas inlets affect the slag opening area. Non-dimensional empirical correlations are proposed to predict the slag opening area in both single as well as dual purged ladles, using non-linear regression analysis.     

Distributed privacy protection strategy for MEC enhanced wireless body area networks

With the rapid development and widespread application of Wireless Body Area Networks (WBANs), the traditional centralized system architecture cannot handle the massive data generated by the edge devices. Meanwhile, in order to ensure the security of physiological privacy data and the identity privacy of patients, this paper presents a privacy protection strategy for Mobile Edge Computing(MEC) enhanced WBANs, which leverages the blockchain-based decentralized MEC paradigm to support efficient transmission of privacy information with low latency, high reliability within a high-demand data security scenario. On this basis, the Merkle tree optimization model is designed to authenticate nodes and to verify the source of physiological data. Furthermore, a hybrid signature algorithm is devised to guarantee the node anonymity with unforgeability, data integrity and reduced delay. The security performance analysis and simulation results show that our proposed strategy not only reduces the delay, but also secures the privacy and transmission of sensitive WBANs data.     

Safe preparation of beefy meaty peptide with Bacillus subtilis

Preparation of flavour peptides with microorganisms is an attractive choice for its large-scale production. However, beefy meaty peptide (BMP), as a research hotspot in the field of umami peptide, has been studied in few microorganisms, and furthermore, the safe preparation of BMP has not yet been reported. In this study, multi-copy BMP (8BMP) was successfully expressed and produced in the ‘generally recognized as safe’ Bacillus subtilis (B. subtilis). Firstly, 8BMP with the potentially intense umami was screened out based on molecular docking analysis. Then, it was successfully expressed in the B. subtilis 168 and verified through sensory evaluation. Finally, the scaling capacity of 8BMP was evaluated in a 5-L fermenter, with the highest yield (0.84 g L⁻¹) 6.4 times than that of shake flask, which is conductive for industrial production of BMP and other food peptides.     

Modeling the influence of changes in aliphatic structure on char surface area during coal pyrolysis

The influence of changes in aliphatic structure on char surface area during coal pyrolysis was modeled, and the effect was introduced to a previous char surface area model for lignite pyrolysis established based on the chemical percolation devolatilization (CPD) model. The modified model can predict not only the N₂ and CO₂ char surface area during rapid pyrolysis of three lignites but also the CO₂ char surface area of two high-volatile bituminous coals; the agreement of the modified model with experiments is improved at high temperatures. The decrease in aliphatic chain length can reduce adsorption positions around aromatic core, and decrease char surface area. When mass release is more than 55% at about 1,100 K, the predicted N₂ char surface area starts to decrease with further generation of volatiles, and the increase of predicted CO₂ char surface area with increasing generation of volatiles also become slow at the end of mass release.     

干熄炉斜道区莫来石-红柱石砖的损毁研究

测试并比较了使用4年后干熄炉斜道区莫来石-红柱石过梁砖不同部位(炉腔侧、风道侧和芯部)砖体的体积密度、显气孔率、耐压强度、化学组成,利用XRD和SEM分别分析了其物相组成和显微结构变化,并对其损毁机制进行了探讨。结果表明:1)莫来石-红柱石砖原始强度较低,易遭受炉体结构应力和热应力破坏;2)与砖体芯部相比,炉腔侧和风道侧受环境气氛影响更大,结构更为疏松,强度下降更明显;3)高温下红柱石莫来石化导致的体积膨胀、低熔点相侵入形成的新物相以及弱还原气氛下SiO2的分解破坏了材料的结合体系,造成了材料致密度的降低和强度大幅下降,是除了炉体结构应力、热应力等因素外,导致干熄炉斜道区莫来石-红柱石砖破坏的不可忽略的因素。